Rooftop units

Johnson Controls’ York Prestige feature an advanced microprocessor control technology with an LED display and a programmable USB interface and digital diagnostic readouts for easier installation.

11/18/2013


Johnson Controls’ York Prestige feature an advanced microprocessor control technology with an LED display and a programmable USB interface and digital diagnostic readouts for easier installation. Courtesy: Johnson ControlsJohnson Controls’ York Prestige commercial rooftop units have an exact-fit replacement design that reduces installation complexities and saves contractors time by eliminating the need for a curb adapter, which is typically required when a new unit does not identically match the existing unit footprint. The 3- to 12.5-ton York Prestige rooftop units are designed to include several features like an advanced microprocessor control technology with an LED display and a programmable USB interface and digital diagnostic readouts, making it even easier for contractors to install, set up, and operate the units. The control delivers information on unit status, start-up and commissioning features, unit setup, supply, return and outdoor air temperatures, and plug-and-play accessories. The available 13 SEER, 10.8-11.2 EER or 15 SEER, 11.5-12.2 EER packaged rooftop units also feature top panels that provide a durable, rigid cabinet for longevity and noise reduction. Sturdy, thicker gauge base rails support easy lifting and reduce potential handling damage, while gaining the highest level in seismic certification ratings. A powder paint exterior finish with 1000-hour salt spray rating offers corrosion protection. 

Johnson Controls

www.johnsoncontrols.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me