Robotic innovations, safety

Cover story: U.S. robotic safety regulations are changing to accommodate global rules allowing collaborate human-robots operation without enclosures. Simpler programming methods and designs improve industrial robot usability, flexibility, and effectiveness, as applications show.

04/10/2013


Robotic innovations, safety - April 2013 - Control Engineering cover photo courtesy: Universal Robots

U.S. robotic safety regulations are changing to accommodate global rules allowing collaborate human-robots operation without enclosures. Simpler programming methods and designs improve industrial robot usability, flexibility, and effectiveness, as applications show. The following articles, edited to fit onto print pages, are linked to full-length versions below, with many photos, and additional links for more information.

New robotic safety regulations are pending - Robotics, subject to many safety regulations, are about to get a few more, addressing some technological advances for robots. See video summary.

 

Optimizing analysis of sugar beets at Nordic Sugar - Nordic Sugar worked with a distributor to install user friendly, reliable robots without enclosures or robotic experts.

6 tips for collaborative robots - Rodney Brooks, chairman and CTO, Rethink Robotics, explained that robots don’t need smarter users; they need to have user interfaces that match users’ capabilities. By redesigning one interface to be more like a game controller and less like the brain of an MIT engineer, users were able to use 85% of one robot’s capabilities within five minutes. Brooks said a collaborative robot should 1) require no integration; a complete system should work out of the box; 2) need no programming or training; it should be usable in minutes; 3) be very capable; 4) work intelligently, with knowledge about its environment, including automatic error recovery; 5) be safe to operate, even if the operator gets hit at full velocity; and 6) have an extensible platform. Brooks spoke about robot survival at the Robotics Industry Forum in February, organized by the Robotic Industries Association (RIA). Learn more about the robot Baxter in this Control Engineering Rethink Robotics interview.

Open-source robotic software advances at kickoff meeting - ROS-Industrial Consortium (RIC) met with 14 organizations interested in fostering advanced manufacturing technologies enabled by open-source software. Learn about five possible projects.

Automaker changes gears without changing grippers - As part of an automaker’s strategy for automated transmission operations, an original equipment manufacturer eliminates costly changeovers by using electric grippers.

Online extras - related online material not appearing in this cover story

Robotic poll results

Control Engineering home page poll questions recently asked questions about robotics.

For a robotic application, what return on investment (ROI) is required to justify? Other benefits trump ROI was selected by 68% of respondents; 11% said 19-24 months.

Would you consider buying or integrating robots for your facility with return on investment less than one year that could work side-by-side with operators and other workers, without an enclosure? Among respondents 69% said “No,” 1% said “unlikely,” 20% said “yes,” and 9% said “likely.”

How many robots do you expect to augment the safety and efficiency of your facility during 2013, ultimately preserving and adding jobs? Among respondents, 80% said more than 50 robots.

For additional poll findings, visit the poll results at www.controleng.com. 

3 ways robots can succeed - checklist for robotic survivalRobot designers who ignore one or more of three principles are doomed to fail, according to a roboticist with 22 patents who has worked for three robot companies and MIT Robotic Lab. Joseph L. Jones, co-founder and chief technology officer, Harvest Automation, spoke about robot survival at the Robotics Industry Forum in February. Successful robots should 1)  Do something that lots of people want done; 2) Be built with existing technology, and 3) Be cost-competitive with current solutions. While this seems perfectly logical, roboticists often ignore these, Jones said, dooming projects to failure. With any mobile robotic design, there are six system challenge areas: application system (sensors, actuators, and software), navigation, hazards, mobility, power, and the interface, Jones said. 

Go Online: manufacturing, other robots, justification

At www.controleng.com, search on “robot” or “robotics” and browse new products, other case studies. Search on “10 reasons to buy a robot” for justification. Watch for additional robotic coverage monthly.

Also see the Control Engineering Machine Safety blog, with more safety advice about codes, standards, and best practices related to machine safety.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2014 Product of the Year finalists: Vote now; Boiler systems; Indirect cooling; Integrating lighting, HVAC
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.