Robot safety standard approved: robots, humans can collaborate safely

The American National Standards Institute has approved ANSI/RIA R15.06-2012, which addresses collaborative operation between workers and robots and soft axis and space limiting technology.


A new American national robot safety standard has been approved by the American National Standards Institute (ANSI). Developed by Robotic Industries Association (RIA), the ANSI/RIA R15.06-2012 standard has been updated for the first time since 1999 and is now harmonized with the International ISO 10218:2011 standard for robot manufacturers and integrators.

RIA robotic safety standard was discussed at Pack Expo 2012. Courtesy CFE MediaA key feature in the standard is “collaborative operation,” which is the introduction of a worker to the loop of active interaction during automatic robot operation. Systems can now be designed for the operator to directly load/unload the robot or manually drive the robot to a selected location thus eliminating costly fixtures.

Another key feature is that the standard addresses “safety-rated soft axis and space limiting” technology. This optional feature available on new robots may have different names depending on the robot manufacturer, but the functionality remains the same. Safety-rated software is used to control the robot motion so that restricted space can be more flexibly designed. Case studies have shown that that this saves both floor space and cost in the system design.

Standards development efforts will now shift to issuing new documents which will provide guidance to the user on using the new ANSI/RIA R15.06, including technical reports on risk assessment and proper implementation of safeguarding robot systems.

American National Standards Institute (ANSI) 

Robotic Industries Association (RIA) 

See related articles below for more, related robotic safety information, videos, and photos. Also see the Machine Safety Blog.

- Edited by Control Engineering, Plant Engineering, CFE Media.

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Salary survey: How much are you worth?; Dedicated outdoor air systems; Energy models and lighting
Fire, life safety in schools; Fire protection codes; Detection, suppression, and notification; 2015 Commissioning Giants; Emergency and standby power in hospitals
HVAC and building envelope: Efficient, effective systems; Designing fire sprinkler systems; Wireless controls in buildings; 2015 Product of the Year winners
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Implementing microgrids: Controlling campus power generation; Understanding cogeneration systems; Evaluating UPS system efficiency; Driving data center PUE, efficiency
Optimizing genset sizing; How the Internet of Things affects the data center; Increasing transformer efficiency; Standby vs. emergency power in mission critical facilities
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.