Revised RP/DC backflow standards available

ASSE's revised RP/DC Backflow Standards have been recognized by ANSI and were worked on in conjunction with FM, IAPMO, and the USC Foundation for Cross-Connection Control and Hydraulic Research.


The American Society of Sanitary Engineering's (ASSE) revised RP/DC Backflow Standards are now available. On Aug. 17, 2011, the American National Standard Institute (ANSI) recognized ASSE's four RP/DC Backflow Standards as American National Standards. These Standards were approved by ASSE's Board of Directors on Aug. 9, 2011.

ASSE's RP/DC Backflow Standards include: ASSE Standard #1013-2011, Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Principle Fire Protection Backflow Preventers; ASSE Standard #1015-2011, Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies; ASSE Standard #1047-2011, Performance Requirements for Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies; and ASSE Standard #1048-2011, Performance Requirements for Double Check Detector Fire Protection Backflow Prevention Assemblies.

These four documents, which are the most stringent, comprehensive and detailed standards of their type, were updated from the previous 2009 versions for consistency with current editions of referenced standards and manuals, and to accommodate additional assembly sizes. The RP/DC Working Group, which developed this standard revision, included consultants, installers, manufacturers, users, distributors and representatives from ASSE, the International Association of Plumbing and Mechanical Officials (IAPMO), Factory Mutual (FM) and the USC Foundation for Cross-Connection Control and Hydraulic Research.

Each of the RP/DC Backflow Standards also allow for a one-year field evaluation for those jurisdictions that require it. Assemblies that successfully pass the ASSE One Year Field Test (1YT), which is performed by 1YT Testers who have met ASSE's rigorous qualifications, are marked with a specially designated ASSE 1YT Seal.

- Edited by Chris Vavra, Consulting-Specifying Engineer, 

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
HVAC and building envelope: Efficient, effective systems; Designing fire sprinkler systems; Wireless controls in buildings; 2015 Product of the Year winners
2015 MEP Giants: MEP Giants annual report; Mergers and acquisitions; NFPA 2001; Fiber-optic cables; LED specifications
Hospital IAQ: Indoor air quality in health care facilities; NFPA 72; Water use and conservation; Net-zero buildings
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Implementing microgrids: Controlling campus power generation; Understanding cogeneration systems; Evaluating UPS system efficiency; Driving data center PUE, efficiency
Optimizing genset sizing; How the Internet of Things affects the data center; Increasing transformer efficiency; Standby vs. emergency power in mission critical facilities
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.