Renault-Nissan to build engine plant in Tennessee

Facility to deliver 400 jobs and 4-cylinder engines for Infiniti and Mercedes-Benz

05/10/2012


Tennessee officials joined Nissan leadership to break ground on a new manufacturing facility in Decherd, Tenn. to build Infiniti and Mercedes-Benz Engines. (PRNewsFoto/Nissan North America)Officials from the state of Tennessee and the Renault-Nissan Alliance broke ground May 8 on a new engine manufacturing facility in Dechard, Tenn. The new facility – located at the existing Nissan powertrain assembly complex – will produce Mercedes-Benz 4-cylinder gasoline engines for Infiniti and Mercedes-Benz models.

"Today, we begin an exciting new chapter for the Renault-Nissan Alliance and our continued investment in the United States," said Mark Swenson, Nissan’s vice president production engineering and component facilities. "Today's groundbreaking marks the latest move in our collaboration with Daimler to localize production capacity and enhance our competitiveness in the global market."

Production of the new engines will begin in 2014 with installed capacity of 250,000 units per year. At maximum capacity, the new facility is expected to create up to 400 jobs and will be the first location Mercedes-Benz manufactures engines in the North America Free Trade region. The Tennessee plant's strategic location will ensure a direct supply of engines for the Mercedes-Benz C-Class, to be built at Daimler's vehicle plant in Tuscaloosa, Ala. in 2014.

Daimler and the Renault-Nissan Alliance first announced their strategic collaboration in April 2010 and are extending their reach into the United States as part of both companies' growth strategy. The companies are also moving forward with a vehicle platform sharing initiative between Infiniti and Mercedes, and development of zero-emission vehicles. The decision to begin jointly producing engines in the U.S. marks the two organizations' collaborative effort's largest venture outside of Europe.

- Edited by Chris Vavra, Plant Engineering, www.plantengineering.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.