Reduce IO operations, maintenance costs with intelligent marshalling

Few process industry cost-cutting initiatives begin at the marshalling cabinet, but a new intelligent marshalling alternative from Invensys may change that.

11/08/2011


Invensys 247 FBM fits into the standard base plate of its I/A Series DCS and can be programmed with software to manage most standard I/O combinations. Courtesy: Invensys and Paul Maggetti of Maggetti Digital MediaFew process industry cost-cutting initiatives begin at the marshalling cabinet, but a new intelligent marshalling alternative from Invensys may change that. Marshalling cabinets are used to collect field wires from devices throughout the plant. Once connected, these field wires are rerouted to the DCS terminations and the marshalling cabinets serve to keep DCS wiring and field wiring safely segregated.

They do so effectively, but changing signals—say from analog to digital input—traditionally requires rewiring. A more recent design has involved swapping out separate modules for each combination of signals required by a process. Invensys has now introduced a new marshalling alternative in the form of a universal FBM module, an intelligent marshalling product that promises to eliminate the need for marshalling cabinets.

Invensys’s new 247 FBM fits into the standard base plate of its I/A Series DCS and can be programmed with software to manage most standard I/O combinations. Working from a networked I/A Series workstation, a process engineer can configure the module for operation with HART, analog inputs, analog outputs, digital inputs, digital outputs, and any combination, and this has numerous benefits.

Intelligent marshalling lowers equipment costs by reducing footprint requirements and improving I/O density. It also saves field labor, and inventory. Rather than maintaining an inventory of spares to accommodate various combinations, for example, process manufacturers need keep only a small number of these universal modules on hand and can configure them when and where needed.

Minimizing spare inventory is especially valuable in DCS installations that have fixed requirements for maintaining a certain percentage of spares. Such requirements are based on I/O type, such as analog inputs and outputs, digital inputs and outputs, HART inputs and outputs, etc. Because the Invensys intelligent marshalling module is universal in nature, one I/O point on one module can fulfill the requirement for what might otherwise be a costly inventory of spare parts.

Some situations even require “hot spares” modules to be stored and maintained on-site, which can get very expensive, especially where multiple remote cabinets may have been deployed. Intelligent marshalling replaces multiple types of I/O modules for “hot spares” with one universal module that can be configured to manage numerous I/O signal paths.

The I/O points can be configured via software; once wired, the I/O point could be modified from an engineering workstation via Internet, anywhere, with appropriate permissions. Changing an I/O point no longer requires installing a whole new module, opening a cabinet, driving to a remote location, purchasing an airplane ticket, or incurring any of the other costly tasks usually required.

Intelligent marshalling installation also requires fewer cabinet drawings for the construction and maintenance reference.

Intelligent marshalling provides process engineers with a simple and effective way to lower operating costs.

- Thad Frost is manager, research development and engineering, Invensys Operations Management, www.invensys.com. Edited by Mark T. Hoske, CFE Media, Control Engineering, www.controleng.com.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me