Record numbers achieved at ProMat 2009

The well-attended biennial event brought a thaw to the brisk Chicago winter and showed that maybe, in some sectors, the frigid economy may be beginning to thaw as well.

02/20/2009


With the downturn in the global economy over the last year, good news has been hard to come by. But not all of the news is bad, especially if you’re in the material handling and logistics business, it appears.
ProMat 2009 , held Jan. 12-15 at Chicago’s McCormick Place, churned out the largest results in the event’s history, the Material Handling Industry of America recently reported. And the best part was that attendees weren’t just there to window shop. They were there to buy equipment.
"The feedback from attendees and exhibitors is that ProMat 2009 was a very successful event for them. Attendees were very serious and ready to make capital purchases now to keep their manufacturing and distribution operations competitive.” said John Nofsinger, CEO of MHIA.
Registration for ProMat 2009 totaled 31,800, and the show featured 729 exhibits covering 305,000 net square feet. Attendance represented key decision makers in virtually all manufacturing, logistics, distribution and the supply chain. Reflecting the growing global nature of the event, attendees from outside the United States represented 100 countries and six continents.
According to Nofsinger, "the exhibitors put on a great show, with a highly diverse array of equipment and technology solutions. Overall, the success of this show says a great deal about the overall strength of this industry as material handling and logistics solutions remain key to industrial productivity and profitability."
More than 5,000 attended ProMat’s educational conference, which numbered more than 100 sessions.





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me