Pumping catalog available

Taco Inc. LOFlo Injection Pumping catalog showcases cooling applications

07/01/2011


The 32-page LOFlo Injection Pumping catalog by Taco Inc. provides a full walkthrough of the features of radiant cooling applications with passive and active chilled beams, available Taco system design tools, selection procedures, technical data and mechanical specifications, performance data, and more. Taco’s LOFlo mixing block is a complete injection mixing station contained in a single factory-assembled package consisting of a hydraulic separator attached to two small LoadMatch circulators, one of which serves primary system flow (injection circulator) and the other which acts as an injection circulator to precisely match the required load on a given zone. The LMB works with radiant systems and requires only two pipes, eliminating control valves and balancing valves. The LMB automatically provides only the flow and temperature of water needed to satisfy a given zone at any given time. The LoadMatch system for heating and cooling is recognized as an integral green building design component.

www.taco-hvac.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me