Program to address infrared heater safety

The Air-Conditioning, Heating, and Refrigeration Institute announced development of the Infrared Heater Safety Council, a safety education initiative dedicated to reducing fires caused by the misuse of infrared heating equipment used in commercial buildings.

05/30/2008


The Air-Conditioning, Heating, and Refrigeration Institute Infrared Heater Safety Council (IRSC), a safety education initiative dedicated to reducing fires caused by the misuse of infrared heating equipment used in commercial buildings.
The council was formed by gas-fired infrared heating equipment manufacturers who believed a program was needed to promote safe use of their products. The council administers a national safety campaign targeted to reach building inspectors, fire authorities and, through them, building owners. “Infrared heating technology has a long history of safety and has been widely used to heat a variety of commercial and industrial buildings such as warehouses, manufacturing facilities, fire stations, vehicle service facilities and aircraft hangars,” said IRSC Chairman Joseph A. Wortman. “But like all gas-burning products, infrared heaters have installation, operation and service procedures that must be followed to ensure safety.”
The IRSC’s educational effort focuses attention on the safe use of infrared heaters, including their proper use, application, gas connections, ventilation and clearances to combustibles. As part of the campaign, a safety pamphlet that highlights safety precautions, provides an overview of applicable codes and standards and a safety checklist for fire inspectors, is being distributed to fire marshals and insurance company risk managers, reveals the organization’s press release.
“We are pleased to support infrared heating manufacturers in the launch of this national safety campaign to reduce improper use of this heating equipment,” said Stephen Yurek, president of AHRI, “Many of the fires associated with infrared heaters are preventable, and for this reason our members want to be part of the solution and put a concerted effort behind safety education.”





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me