Product Showcase | September

10/03/2006




Visit www.csemag.com for industry news and features
September 2006

Special Advertising Section Dear Reader,
Here is the next edition of Consulting-Specifying Engineer's product and system solutions showcase. If you would like any additional information sent to you from any of the companies below regarding their products fill out this form
.

Featured Products



Cleaver-Brooks’ E+Plus Stack Economizer
Cleaver-Brooks’ new CB Packaged E+Plus Stack Economizer saves energy dollars and reduces emissions. The versatile design allows for multi use applications of steam and hot water boilers from 150-2200 HP. Features include removable tubes and internal bypass. Available for new or existing boilers. Click here.



For more information on

Cleaver-Brooks

click here.

 




TRUE DUAL 2-Stage Heaters
Solaronics' energy efficient
TRUE DUAL 2-Stage heaters
bringunprecedented fuel cost savings of up to 75% for commercial,industrial and institutional buildings. Both air and gas flows of thepatented Solaronics system provide for precise air-to-gas- ratios at both the high- and low-heat stages for optimum efficiency.Applications include: manufacturing plants, warehouses, aircrafthangars, loading docks, auto dealerships, body shops, ice/roller rinks.
Solaronics, Inc. 800-223-5335 Click here.



For more information on

Solaronics


click here .



NEW P&S PLUGTAIL™ RIGHT ANGLE CONNECTOR
The P&S PlugTail™ Right Angle Connector fits all P&S PlugTail Receptacles, with crimped and welded contacts to feed the wire at a 90-degree angle. This makes mounting the receptacle in the box less labor intensive than traditional solutions. At rough in, splice the Connector into the box. At device out,snap in the Receptacle and mount it. Installation is at least three times faster than traditional wiring device methods. Call 1-800-223-4185 or Click here.



For more information on

Pass & Seymour

click here .


POWER CONTROL AND PROTECTION SYSTEMS
Fortune 1000 companies, data centers, hospitals, and other mission-critical facilities rely on Russelectric custom-built on-site power control systems to ensure 100% uptime. Systems (synchronizing switchgear, ATSs, and custom SCADA) enable control strategies such as emergency/standby power, peak shaving, load curtailment, utility paralleling, and distributed generation. www.russelectric.com



For more information on

Russelectric

click here .


This newsletter was sent to stephanie.grammens@reedbusiness.com
You have received this free product showcase because you are a qualified subscriber to Consulting-Specifying Engineer magazine, you are a member of an accredited industry association, or you have requested this newsletter. If you do not wish to continue receiving this newsletter, please unsubscribe by following the instructions below:
To subscribe, click here


Please distribute this newsletter freely; however, we ask that you not change its contents.

To Advertise:
Stephanie Grammens Stephanie.grammens@reedbusiness.com
630-288-8019

Alternate Unsubscribe:
Send a request to RBI Online Support Team, 2000 Clearwater Drive, Oak Brook, IL 60523
(Fax: 630/288-8782)

Customer Service:
E-mail eletters@reedbusiness.com

Sign up for a FREE subscription to Consulting-Specifying Engineer magazine.
View our Privacy Policy.

 






No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me