Proactive energy bill approved

President Bush signed the Energy Independence and Security Act of 2007 into law Dec.19. The act has several sections: • It phases out the use of inefficient incandescent lights and imposes improved energy efficiency standards on a wide variety of products. According to the American Council for an Energy-Efficient Economy, the new standards for light bulbs require them to use about 20% to ...

01/01/2008


President Bush signed the Energy Independence and Security Act of 2007 into law Dec.19. The act has several sections:

• It phases out the use of inefficient incandescent lights and imposes improved energy efficiency standards on a wide variety of products. According to the American Council for an Energy-Efficient Economy, the new standards for light bulbs require them to use about 20% to 30% less energy by 2014, while requiring the U.S. Dept. of Energy to set standards for light bulbs to cut their energy use at least 35% by 2020.

• This act calls for accelerated research and development and deployment of renewable energy technologies, although all the provisions are subject to congress-ional appropriations of funds. Research will be conducted in the areas of solar energy, geothermal energy, and marine and hydrokinetic energy.

• It mandates a 40% increase in fuel economy by 2020 and requires the Dept. of Transportation to set more stringent fuel economy standards with cars made in 2011.

• The act boosts the requirements for renewable fuel use to 36 billion gallons by 2022. The act requires advanced biofuels—defined as fuels that cut greenhouse gas emissions by at least 50%—to provide 21 billion gallons of fuel by 2022, or about 60% of the total requirement.





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me