President's Message


First, the good news: Energy prices are down and so is the cost of construction materials. In fact, Reed Construction Data reported in March that the drop in materials costs in 2009 has erased the cost increases of 2008.

But, the bad news is of greater concern: Construction activity is down for the first time since 2003 marked the turning point of recovering from 9/11. A freeze in financing has caused the delay of planned projects, and halted construction on some projects that had already begun. From municipal bonds to capital loans, it's difficult for companies to get the short-term and long-term financing they need to fund construction and renovation projects.

But perhaps the bad news won't turn out so bad after all. The momentum for energy efficiency and green construction is still strong. As the stimulus bill directly and indirectly funnels billions into construction projects, commercial and industrial markets might experience some bounce back.

Also, with the bailout bill passed last October, tax credits for energy-efficiency projects were extended not for one year, but for a confidence-building five years. Also (finally) bank reform is of the highest priority of the Obama Administration; they seem to be gradually working toward a solution that Wall Street and Main Street will embrace. (We can only hope.)

Internationally, countries are working hard to right their economies and get things back on track. The economy truly is global, so we're all in this together.

As the year unfolds, you can count on AMCA International to monitor economic news and events and report to its members and the construction community.

Meanwhile, we invite first-time readers of AMCA inmotion and those who may not be familiar with AMCA International to visit to learn about our Certified Ratings Program, peruse our database of member companies with certified products, and add AMCA International manuals and testing standards to your company's engineering libraries.

Best wishes,

Denis Labelle

2008-2009 President, AMCA International Executive Vice President, T.A. Morrison & Co. Inc.

AMCA International, Inc. is a not-for-profit association of the world's manufacturers of related air system equipment. For over 80 years, it has led the way in standards development and application research.

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
MEP Giants; MEP Annual Report; Mergers and acquisitions; Passive, active fire protection; LED retrofits; HVAC energy efficiency
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me