Prefabricated assemblies

FAS Power FB816 prefabricated assemblies from Legrand are designed to reduce installation time for electrical rough-ins.

04/08/2013


Legrand FAS Power FB816FAS Power FB816 prefabricated assemblies from Legrand are designed to reduce installation time for electrical rough-ins. Each FB816 is shipped pre-wired, fully assembled, and ready for use in concrete block walls. Each assembly comes with a clear cover to protect pre-wired P&S PlugTail connectors. P&S outlets and switches are installed at finish with a snap. They are available with single, double, or round adjustable plaster rings, and each ring adjusts to fit blocks up to 1-1/2-in. thick. All assemblies are fitted with an EMT compression fitting and an optional foot EMT stub.

Legrand North America

www.legrand.us



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me