Power system testing, calibration system

Fluke's automated and traceable Calibration 6135A/PMUCAL Phasor Measurement Unit (PMU) Calibration System is an integrated system that can complete 600 tests and certify a PMU configuration in less than one day.

01/14/2014



Fluke's automated and traceable Calibration 6135A/PMUCAL Phasor Measurement Unit (PMU) Calibration System is an integrated system that can complete 600 tests and certify a PMU configuration in less than one day. Courtesy: FlukeFluke's automated and traceable Calibration 6135A/PMUCAL Phasor Measurement Unit (PMU) Calibration System is designed for manufacturers as well national metrology institutes, third party calibration houses, and electrical utilities.

The 6135A/PMUCAL is an integrated system of six components that completes the approximately 600 tests that certify a PMU configuration meets the latest performance standards of the IEEE Standard for Synchrophasor Measurements for Power Systems (IEEE C37.118.1:2011 and IEEE C37.242). The system completes the tests in 6 to 12 hours, versus two-to-six weeks with manual test methods. And because it's an automated system, even non-experts can start using it quickly to perform a complete complement of required tests.

The system, which is mounted in a 19-inch rack with an integrated test connection panel, includes a server PC, GPS receiver, system timing unit, and three-phase 6135A Electrical Power Standard. It also includes calibration software that allows users to create and store personality profiles for the PMUs tested frequently, as well as run full certification tests and a wide range of automated and interactive tests.

Fluke

www.fluke.com 

- See more Control Engineering manufacturing IT and MES products.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me