Power supply product reliability tests exceed 10 years

Miyachi Unitek tests power supply products, some of which reportedly have been running continuously in 105° temperatures for over a decade.


Miyachi Unitek Corp., a manufacturer of welding equipment and laser processing systems, for decades has allegedly been assessing its power supply technologies for effectiveness, reliability and durability by putting its power supply products to the test, running them continuously in an extreme 105° environment to prove the design’s merit.

The testing occurs in an area in the factory referred to as “the torture room” for its high temperatures and constant clatter of weld heads. The torture room holds a variety of Miyachi’s resistance welding power supply units, including advanced capacitive discharge welders and full-featured AC resistance weld controls. Many units have been run continuously for 10 to 15 years, for a total of 15 to 25 million cycles.

The objective of the torture room is to understand how the products perform over time. Miyachi Unitek’s engineers determine what works well and what breaks down after years of use, and they use that information to improve the next generation of equipment.

The torture room also allows Miyachi Unitek to make better guarantees about their technologies’ performance. “When your sales person praises a system’s reliability, we know it’s the truth because of our tests,” said Kevin Gunning, director of quality, service and support. “Our thorough assessments allow us to confidently say our equipment is robust enough for the long haul.”


Miyachi Uniteck

- Edited by Amanda McLeman, Control Engineering, www.controleng.com

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
HVAC and building envelope: Efficient, effective systems; Designing fire sprinkler systems; Wireless controls in buildings; 2015 Product of the Year winners
2015 MEP Giants: MEP Giants annual report; Mergers and acquisitions; NFPA 2001; Fiber-optic cables; LED specifications
Hospital IAQ: Indoor air quality in health care facilities; NFPA 72; Water use and conservation; Net-zero buildings
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Implementing microgrids: Controlling campus power generation; Understanding cogeneration systems; Evaluating UPS system efficiency; Driving data center PUE, efficiency
Optimizing genset sizing; How the Internet of Things affects the data center; Increasing transformer efficiency; Standby vs. emergency power in mission critical facilities
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.