Power quality and energy analyzer

The Fluke 437 Series II 400 Hz Power Quality and Energy Analyzer is designed specifically for technicians in avionics and defense, like submarine, aircraft, military ship, and other transport applications, where 400 Hz measurements are mission critical.

10/03/2012


The Fluke 437 Series II 400 Hz Power Quality and Energy Analyzer is designed specifically for technicians in avionics and defense, like submarine, aircraft, military ship, and other transport applications, where 400 Hz measurements are mission critical. CFluke's 437 Series II 400 Hz Power Quality and Energy Analyzer is designed specifically for technicians in avionics and defense. It's ideal for submarine, aircraft, military ship and other transport applications where 400 Hz measurements are mission critical.

The Fluke 437 is the latest model in the Fluke 430 Series II Three Phase Power Analyzers, which use the Unified Power Management algorithm, to measure and quantify energy losses due to harmonics and unbalance issues, allowing users to pinpoint the origin of energy waste within a system.

The 435 and 437 models include PowerWave, a fast capture system that displays waveforms and half cycle RMS voltage and current values in full detail to measure interactions during switching operations to prevent motor/drive/load mismatches.

Both are fully compliant with IEC 61000-4-30 Class-A. Each can monitor systems with up to ten power quality parameters on one screen, can record up to 150 parameters on four phases simultaneously, in accordance with the EN50160 standard, and are safety rated 600 V CAT IV/1000 V CAT III.

Fluke Corporation

www.fluke.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me