Power product line: conditioners and transformers

The DVS Power Conditioner and ISN Ferroresonant Regulation Transformers are designed for use with inverters, UPS systems, or stand-alone operation and produce regulated, isolated ac output in harsh environments.

01/25/2017


The DVS Power Conditioner and ISN Ferroresonant Regulation Transformers are designed for use with inverters, UPS systems, or stand-alone operation and produce regulated, isolated AC output in harsh environments. Courtesy: SCIThe DVS Power Conditioner and ISN Ferroresonant Regulation Transformers from AMETEK are designed for use with inverters, UPS systems, or stand-alone operation and produce regulated, isolated ac output in harsh environments. The DVS power conditioner utilizes a copper-wound, triple-shielded, low-impedance isolation transformer in a single system enclosure, and it incorporates state-of-the-art microprocessor technology and independent phase regulation engineered to eliminate voltage spikes and sags. The ISN Series power conditioners are ferroresonant regulating transformers and short-circuit protected so overloads and short circuits on the secondary line are not reflected back to the primary.

AMETEK Solidstate Controls Inc. (SCI)

www.solidstatecontrolsinc.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me