Power control systems for gensets
Russelectric on-site power control systems have dual PLCs for automatic generator set starting and stopping as well as a manual control system.
Russelectric on-site power control systems are equipped with dual PLC for automatic generator set starting and stopping, status and alarm annunciation, synchronizing, and priority load control. A If the primary PLC fails, the backup PLC assumes operational control. If both PLCs were to fail, a manual control system allows operating personnel to synchronize and parallel the generators onto the bus, as well as to add and shed load. This built-in redundancy is included in all Russelectric on-site power control systems. The instruments and other devices that facilitate manual operation are mounted on a hinged panel that can be specified to swing either left or right for easy viewing from adjacent control cubicles during manual operation. Russelectric custom designs and builds power control and synchronizing switchgear systems in low- and medium-voltage ratings for single- and multi-unit on-site power generators.
Russelectric
Do you have experience and expertise with the topics mentioned in this content? You should consider contributing to our CFE Media editorial team and getting the recognition you and your company deserve. Click here to start this process.
Related Resources
