Plant performance monitoring solution helps make smart decisions

GE’s MyFleetTM Plant Performance Monitoring software equips plant operators with better access to fleet performance data

06/27/2011


With world electricity demand expected to increase 75 percent by 2030, plant owners and operators are under continual strain to produce more power more efficiently with fewer resources. Data about plant performance is key to making smart operational decisions, but until now operators have had access only to piecemeal information about their plants and fleets—examining performance often in a vacuum without knowledge of how similar operations are running.

To address this information gap, GE today has made the MyFleetTM Plant Performance Monitor, which gives thermal power-generating plant owners and operators access to a wealth of power generation fleet information. This tool leverages performance data from the GE global fleet, totaling 200 GW of thermal power, routinely captured through GE’s Monitoring and Diagnostics Center, and correlated against over 10,000 operating years of historic data. Access to this data enables plant operators to compare their performance against the detailed backdrop of GE’s turbines and empowers them to make more informed decisions based on how similar plants are operating, helping to identify opportunities for operating efficiency gains.

“Our customers are faced daily with the challenge of accessing and processing detailed performance data effectively and quickly,” said Ross Marcoot, general manager—total plant optimization for GE Energy Services.

The MyFleet data visualization and decision support software provides plant owners with a complete snapshot of more than 50 key performance metrics, uncovering opportunities for strategic efficiency gains while increasing their knowledge and decision making-power.

MyFleet is designed with users in mind and provides flexibility to suit a variety of needs and situations. For example, operators may compare their assets to one another, or across 1,200 power facilities to more effectively analyze plant operations and potential upgrades. Comparisons also can be made by operating conditions, geographic deployment and other parameters. While customers can identify each of their assets by serial number, all remaining fleet data used in the comparative analysis remains anonymous.

This Web-based tool is accessible via any internet-connected device, including mobile, tablet and smartphone applications, allowing operators to access information on the go.

www.ge.com/energy

GE Energy

- Edited by Gust Gianos, Control Engineering, www.controleng.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me