Plant Engineering Workforce Development Study: Lack of skilled workers leading to unfilled jobs

Finding qualified workers to fill needed manufacturing jobs has continued to remain a problem for companies and it is limiting their ability to expand operations.

09/17/2013


Manufacturing has a skills gap; that much is understood by industry professionals. As the recently completed Workforce Development Study of the issue by Plant Engineering reveals, identifying the solution to this issue remains elusive.

Courtesy: Plant EngineeringPlant Engineering surveyed its readers in July 2013 on the prevailing attitudes about hiring and training in manufacturing. The fundamental problem remains acute, as 59% of plant managers reported a skilled workforce shortage in their plant. In addition, 22% of the plants said more than 10% of jobs are unfilled for this reason.

It’s a lack of skills, not a lack of workers that is impacting this issue more acutely; 78% of manufacturers reported a lack of skills as the biggest challenge they currently face in filling their skills gap; only 33% blame a lack of applicants.

Perhaps more important, one-third of respondents said the worker shortage is keeping them from expanding their operations.

Too many plant managers feel they are on their own in trying to solve this problem. While 43% feel they can get help from the high schools and community colleges, approximately one-third feel they’ll have to solve the problem themselves because they won’t get adequate help from regional or local agencies.

In response, manufacturers are using a wide range of new recruitment tools and channels:

  • 63% of manufacturers are recruiting online
  • 54% reach out to community colleges
  • 22% reach out to high schools
  • 21% reach out to veterans.

Courtesy: Plant EngineeringWhile manufacturers are active in their communities, that activity hasn’t extended to vocational education; just 24% said they are involved in such programs locally, yet 55% are members of their local Chamber of Commerce, and 42% sponsor youth sports teams.

That local involvement may explain one of the largest gaps in this survey. While 57% don’t feel manufacturing is seen as a positive career choice in the U.S. as a whole, 85% believe their plant is seen in a positive light in their own community.

Respondents had a wide variety of views on how to improve that perception, which most believe is the key to getting more attention on skilled jobs in manufacturing. Among the comments:

  • “It's not seen as glamorous or desirable. The pay and stability would indicate that it is, but the public relations needs to catch up to the reality.”
  • “Strengthen connection between manufacturing and actual wealth creation instead of just moving wealth around as in other disciplines (law, government, etc). Stop worrying so much about how we compare to doctors, lawyers, etc., in the public eye. Those who work in manufacturing know they are contributing to wealth creation.”
  • “As we deal with the new work force there is a gap from both sides. The young work force is taught that they will change jobs 7 to 10 times in their career. Companies tend to reinforce this by not addressing the needs of the current generation.”
  • “Convincing young people that manufacturing offers a rewarding career if you like long hours, physical activity, multiple demands, and teamwork when none of these are typically seen as very ‘glamorous.’”
  • “Educate the masses on what the manufactured goods and services do to keep the economy going.”
  • “Expand apprenticeship programs and communicate to K-8, junior high schools and high schools opportunities in manufacturing. This must be done by the school systems. Company and union leadership should also promote manufacturing opportunities within their region.”
  • “I don't think many understand the amount of technical skills required in manufacturing or the pay level.”


Gerry , Ontario, Canada, 09/24/13 11:37 AM:

The corollary is underskilled workers i.e. individuals that are marginally able to meet the requirement to fill the gap. Unfortunately, this starts at about grade 2. With women now in the majority of post secondary graduates, the traditional male/female imbalance in STEM program participation is not helpful. Also, post-secondary institutions increasingly filling STEM seats with foreign students is masking the problem.
Gerry , Ontario, Canada, 09/24/13 11:45 AM:

HR professionals are also part of the problem. Too often, recruiters have no real idea of what's actually needed: this typically results in a stream of candidates that are not a good match to requirement which creates an overly strong impression that skills are lacking even more than they are.
Retention is another issue: given a shortage of skilled labor, companies overload their skilled labor to the breaking point. If nothing else, overload reduces the level of performance of skilled employees, in effect exacerbating the skills shortage.
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
Cannon Design’s blog is a place for the many voices of the firm to share thoughts and news related to current projects...
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.