Permanent magnet motors

NovaTorque has expanded their Electronically Commutated Permanent Magnet (ECPM) motors to include 3 hp and 5 hp models. They are designed to be more energy efficient and have high power density.

01/18/2013


NovaTorque has expanded their Electronically Commutated Permanent Magnet (ECPM) motors to include 3hp and 5hp models. They are designed to be more energy efficient and have high power density. Courtesy: NovaTorqueNovaTorque's family of Gen2.0 PremiumPlus+ Electronically Commutated Permanent Magnet (ECPM) motors will soon be available in high speed 3hp and 5hp 2400 rpm (maximum speed 3600 rpm) models. Also available in 3 hp and 5 hp 1800 rpm models (maximum speed 2700 rpm), NovaTorque motors utilize low-cost ferrite magnets in a flux-focusing design.

Driven by variable frequency drives, Gen2.0 PremiumPlus+ ECPM motors boast motor-only rated point efficiencies of 93.0 and 92% percent for 3 hp and  5hp versions respectively, far exceeding the levels achieved with induction motors. Additionally, unlike induction motors, NovaTorque’s PremiumPlus+ ECPM motors maintain their high efficiency and high torque over a very broad speed and load range.

NovaTorque PremiumPlus+ motors are packaged in standard NEMA frame sizes and mounting dimensions for easy substitution. Due to their high power density, NovaTorque motors are available both in the mounting frame size typical for induction motors, as well as one frame size smaller. 

NovaTorque Inc.

www.novatorque.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me