Pedestrian entrance control technology gets smarter

IHS estimates the world market for speed gates to be valued at $219.1 million in 2013 and forecast the market to grow to $310.0 million by 2017.


Speed gates, like many other access control and security solutions, have begun to take advantage of the benefits of IP technology. The advantages of IP technology has been experienced by both end-users and integrators due to the cost saving associated with remote monitoring capabilities.

IHS estimated the world market for speed gates to be valued at $219.1 million in 2013 and forecast the market to grow to $310.0 million by 2017.

According to IHS, the main advantage integrators and end-users have seen from purchasing IP-enabled devices is related to service costs. A speed gate on an IP network can be monitored from remote locations. This is valuable for integrators who can troubleshoot devices offsite, discover which part of a machine is not working and deploy a technician with the correct tools and parts to service the speed gate.

This cuts down substantially on the travel needed to be done by technicians. Technicians in the past often did not arrive on site with the necessary replacement parts because the diagnostics needed to be completed on site, resulting in multiple trips and added service costs.

While IP technology is still in its infancy in many parts of the world, North America and Western Europe have made strides to fully implement this solution type. However, this does not suggest all pedestrian entrance control end-users in these two regions have accepted the technology. For example, while there has been a large uptake of IP technology in North America over the past few years, it has been estimated that only half of consumers are fully embracing IP to integrate turnstiles with other security systems.  Other end-users are unsure of future requirements and are choosing to purchase speed gates with IP functionality which can be implemented at a later date.

Overall, in order to take advantage of this market, it is important that manufacturers begin to offer IP functionality as integrators and end-users look to reduce the lifetime cost of products.

This research note is courtesy of Omar Talpur, an analyst for access control, fire and security at IHS Inc.

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Salary survey: How much are you worth?; Dedicated outdoor air systems; Energy models and lighting
Fire, life safety in schools; Fire protection codes; Detection, suppression, and notification; 2015 Commissioning Giants; Emergency and standby power in hospitals
HVAC and building envelope: Efficient, effective systems; Designing fire sprinkler systems; Wireless controls in buildings; 2015 Product of the Year winners
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Implementing microgrids: Controlling campus power generation; Understanding cogeneration systems; Evaluating UPS system efficiency; Driving data center PUE, efficiency
Optimizing genset sizing; How the Internet of Things affects the data center; Increasing transformer efficiency; Standby vs. emergency power in mission critical facilities
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.