Partly sunny with a chance of manufacturing growth

Content manager Bob Vavra shares his views on the similarities between weather and manufacturing in his January/February 2012 In Conclusion column.

02/16/2012


Bob Vavra, Content Manager, Plant Engineering, CFE Media LLCWeather is not an exact science. Few of them are, as it turns out, but weather is the one that gets its own segment on the nightly newscast. In recent years, we’ve seen global radar and digital displays turn the weather into its own little three-minute multi-media presentation.

Behind the glitz is the actually science, of course, Meteorology is a lot more than looking out the window at the clouds or sticking a finger up in the air – let alone consulting grandma’s hyperactive bunion or grandpa’s trick knee. People study the data and form an opinion about what’s going to happen next. The stereotypes about weathermen aside, if four people in the same town tell you it’s going to snow tomorrow, it’s a good idea to have your shovel ready.

The weather forecast for manufacturing is partly sunny, according to most experts we’ve surveyed for the 2012 Forecast issue at Plant Engineering. More importantly, the storm front is passing, the skies are clearing and there are better days ahead in the long-range forecast. These aren’t hopeful wishes; they are data-driven, reasoned outlooks for our immediate future. If nothing else, they should make us want to want to get out and do a few more things.

The time for waiting for the storm to pass is over. It’s time to invest in manufacturing, to travel and explore the rest of the world for potential new markets, to take a few minutes to appreciate the sunshine and warmth.

It’s never warm enough for some people, of course, and a return to full prosperity will take more time. That’s no reason not to get ready. It’s the same reason we do spring cleaning each year. We do it to get prepared for the summer – so we won’t have to waste a minute of the warmth on preparation we could have done earlier.

It’s time, now, to start evaluating your operation. (It actually was time about a year ago when we first saw the signs of rebirth in manufacturing.) It’s time to study our four major areas for operational improvement for 2012:

  • Safety: Is there any reason you cannot make safety the top priority for you and your organization in 2012? The potential for cost savings and operational efficiency is so great, and the cost for a lack of safety so enormous, that it must be a financial imperative for every plant. But safety is first about people, and if you do not value your employees, no amount of cost savings will earn their loyalty.

  • Maintenance: The best plants deliver high output at low overall costs. Like safety, I believe maintenance is a profit center. It delivers productivity with little waste and high quality. Make this the year that you devise and execute a maintenance strategy.

  • Energy: Here’s a budget line item that has been transferred from Accounts Payable to the plant manager’s domain. Managing energy costs represent the single greatest opportunity to reduce your day-to-day operational costs, and yet it is just starting to get the attention it deserves. The economics of the day demand that you look at electrical power, fossil fuels and compressed air as cost centers to be managed and not bills to be paid.

  • People: You have time to train and develop your staff, and you have a need to scout and recruit new talent. You have to be proactive on both fronts. Don’t wait for a performance gap or an unexpected retirement or resignation to spur you into action. The best time to look for a job is when you have one; the best time to find new workers is before you need them.

I think we’ve sat inside long enough, waiting for things to get better. Even if the winds do change, all of these efforts above will help weather the next storm, and the one after that. We’re going to spend this year talking about each of these areas in great depth in print, and each day at our Website, PlantEngineering.com. I think the opportunities are greater than the challenges, and those manufacturers who seize the opportunities in 2012 will be the ones basking in the sun this time next year.

Being a Midwestern boy, I often get asked about Chicago winters. I tell people I’ve come to appreciate Chicago winters if for no other reason than they make me appreciate Chicago summers all the more.

It’s now springtime for manufacturing. Winter is over, and if there are a few chilly and rainy days left, that shouldn’t stop us from looking ahead. Summer is just around the corner.

Vavra is the content manager for Plant Engineering magazine.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.