Packaged Systems Produce

The packaged HVAC system has been around since mechanical engineers started offering forced air heating and cooling to offices, merchants, industries and residences. In many design situations, engineers have become very dependent upon HVAC manufacturers to provide them with a range of complete packaged HVAC systems to fit various applications.

11/01/2003


The packaged HVAC system has been around since mechanical engineers started offering forced air heating and cooling to offices, merchants, industries and residences.

In many design situations, engineers have become very dependent upon HVAC manufacturers to provide them with a range of complete packaged HVAC systems to fit various applications. There are numerous HVAC manufacturers who offer specific packaged systems that will fit many specific client needs. There are also many manufacturers who cover a wide range of sizes, quality levels and types of systems.

The definition of a packaged system may vary slightly by manufacturer and engineer. In general, a packaged system is a pre-assembled piece of HVAC equipment that is constructed using two or more individual components to operate as one complete system. This definition covers a broad spectrum of equipment. Packaged units include, but are not limited to, chillers, unit heaters, rooftop units, custom air handlers and many VAV applications.

The benefits of a packaged HVAC system are first cost of equipment and installation. Imagine putting together an air-conditioning system from scratch for a two-story 35,000-sq.-ft. building. How would all the pieces fit together? You would need a mechanical room to contain them, which is becoming more of a rarity these days, and the labor to connect each component would be very high. So, off-the-shelf equipment becomes a time and money saver for all involved parties. The packaged unit generally comes factory-tested, and delivery times are usually reasonable and are offered in sizes for almost every application.

Trends in HVAC manufacturing and design are always based on cost effectiveness and efficiency. Lighter and smaller equipment is the future of packaged equipment. Additionally, heat recovery is making a comeback due to better materials and improved manufacturing techniques. Heat recovery can be packaged with larger rooftop units such as pool dehumidification. The heat recovery components are becoming traditional in that the exhaust air is used to preheat or precool the outside air, thereby reducing operating costs and preventing moisture damage to the structure.

Special applications will always require unconventional design and will include individual components assembled to operate as a single HVAC system. The majority of work in the consulting business comes in the form of applications that can be properly served with a packaged HVAC system. This is usually driven by first cost, convenience and timeliness of the packaged systems available. Design time is also a factor, and the costs associated with designing a complex misapplied system can ruin a project.

Selecting a pre-assembled, properly-applied packaged HVAC system saves everyone time and money. This is why the packaged HVAC system has been used since the dawn of air conditioning and will also be the way of the future.



Packaged system benefits

Equipment first-cost and installation savings

Multiple system types, sizes and manufacturers to choose from

Factory-tested

Adherence to trend of lighter and smaller equipment



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me