Packaged rooftop systems

The PR-Series of packaged rooftop systems are designed to provide fresh air for critical facilities and features air source cooling-only, air source heat pump, and boiler/cooling tower or geothermal water source heat pump.

07/16/2014


Addison's PR-Series of packaged rooftop systems are designed to provide fresh air for critical facilities and features air source cooling-only, air source heat pump and boiler/cooling tower or geothermal water source heat pump. Courtesy: Addison HVACAddison's PR-Series of packaged rooftop systems are designed to provide fresh air for critical facilities like schools/universities, health care facilities/hospitals, and hotels/resort complexes. The PR-Series offers design flexibility with a wide selection of factory options including the ability to accept custom options for specific job requirements. Available in 3-70 tons, the PR-Series packaged rooftop cooling system's source side abilities include air source cooling-only, air source heat pump and boiler/cooling tower or geothermal water source heat pump. The product also features direct drive supply and exhaust fans and final filters not mounted in the roof curb. Factory-installed options include supplemental heating, dehumidification, ventilation, corrosion protection, electrical and refrigeration control.

Addison HVAC

www.addison-hvac.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me