OSHA renews strategic partnership to reduce injuries, lost work time at Ford Motor Co. auto plants

Partnership includes UAW, ACH and MIOSHA in partnership with OSHA, Department of Labor

06/13/2011


OSHA administrator Dr. David Michaels has signed an agreement renewing OSHA’s partnership with Ford Motor Co., the United Automobile, Aerospace and Agricultural Implement Workers of America and Automotive Component Holdings LLC, and welcoming the Michigan Occupational Safety and Health Administration as a new partner.

“OSHA’s partnership with Ford and the UAW has helped significantly reduce the frequency and severity of worker injuries,” said Michaels. “The partnership is a win-win for management and labor. It contributes to Ford’s competitiveness in the global economy while protecting the safety and health of thousands of workers.”

The goal of this strategic partnership is to prevent occupational fatalities, injuries and illnesses at participating Ford Motor Co. and Automotive Component Holdings locations in Michigan, Ohio, Illinois, Missouri and New York.

Since 2000, OSHA has had a partnership with Ford and the UAW. ACH joined the partnership more recently. The partnership has resulted in a 74 percent reduction in total case incident rates and an 88 percent decrease in days away from work, restricted duty and job transfers, better known as “DART,” rates. In 2010, 75 percent of worksites participating in this partnership had DART rates below Labor Department’s Bureau of Labor Statistics industry averages.

Plants covered by this agreement under federal OSHA include: Chicago Assembly Plant and Chicago Stamping Plant, Chicago, Ill.; Kansas City Stamping Plant, Kansas City, Mo.; Buffalo Stamping Plant, Hamburg, N.Y.; Cleveland Engine Plants 1 and 2, Brook Park, Ohio; Lima Engine Plant, Lima, Ohio; Ohio Assembly Plant, Avon Lake, Ohio; Sharonville Transmission Pant, Sharonville, Ohio; Sandusky Plastics Plant, Sandusky, Ohio; and Walton Hills Stamping Plant, Walton Hills, Ohio.

Michigan plants covered by this agreement under state OSHA include: Dearborn Tool and Die Plant; Dearborn Truck Plant; Dearborn Diversified Manufacturing Plant; Dearborn Stamping Plant; Dearborn Engine and Fuel Tank Plant; Michigan Assembly Plant in Wayne; Woodhaven Stamping Plant; Livonia Transmission Plant and National PDC in Livonia; Van Dyke Transmission Plant and Sterling Transaxle Plant in Sterling Heights; Romeo Engine Plant; Rawsonville Parts Plant; Brownstown Parts Redistribution Center in Romulus; Woodhaven Forge Plant; and Saline Instruments and Plastics Plant and the Sheldon Road Plant in Plymouth Township.

www.osha.gov

 - Edited by Chris Vavra, Plant Engineering, www.plantengineering.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me