Occupancy light sensor
The PlugTail P&S PlugTail Sensor was designed by Legrand/Pass & Seymour to help contractors meet ASHRAE energy-efficiency standards and government incentive requirements, sensing occupancy and responding with light.
The PlugTail P&S PlugTail Sensor was designed by Legrand/Pass & Seymour to help contractors meet ASHRAE energy-efficiency standards and government incentive requirements, sensing occupancy and responding with light. At rough-in, the pre-stripped connector leads are installed instead of pigtails without the need for a wire caddy. A polybag keeps the connector free of dirt, dust, and joint compound until trim-out, and this device is installed on existing PlugTail switch boxes in less than a minute by clicking the connector and tightening the mounting screws. These 60 Hz occupancy light sensors are designed with load maximums of 800 W at 120 V and 1200 W at 277 V.
Case Study Database
Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.
These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.
Click here to visit the Case Study Database and upload your case study.
