Non-metallic enclosures, custom built, for machine builders, OEMs

Designers of industrial machinery who use enclosures for electrical controls face challenges in enclosure weight, safety, and budget. UL listed PVC in sheet form and CAD/CAM software help with low-cost, quickly made custom enclosures, said Midwest Plastic Fabricators.

10/14/2010


These enclosures from Midwest Plastic Fabricators range from 6x4x4 inches to 26x31x8 inches. There are no size or configuration constraints, the company said. (A double door cabinet has removable center post)Designers of industrial machinery who use enclosures for electrical controls face challenges in enclosure weight, safety, and budget. Machine builders and original equipment manufacturers (OEMs) can get custom enclosures using UL listed PVC in sheet form made with CAD/CAM software. Midwest Plastic Fabricators said it can achieve rapid enclosure design and delivery using a patented process to meet critical performance, cost, and dimensional requirements. In a collaborative effort, Midwest Plastic Fabricators said it designed enclosures working with the distributor and under the direction of the machine builder. Each enclosure is completed with specific panels and cutouts for conduit, fans, and A/C. Doors have key lock latches and all enclosures have robust stainless steel hardware. Flush doors add to the aesthetics of the machine design. The square design of these patented enclosures facilitates mounting onto engineered machine surfaces, as they have no draft angles. Cost is reduced by having all cut-out features incorporated during the manufacturing. This process also improves quality and speeds delivery. Features of the material – PVC and polycarbonate – include being lightweight but durable, non-corrosive, non-conductive, and not needing paint. Enclosures are manufactured to UL50, meet NEMA 4X standards, and are made in Aurora, Ohio.

 

www.midwestplasticfabricators.com

Midwest Plastic Fabricators

Also read from Control Engineering:

Frame, wire management: Save 25% on electrical panel designs;

System Integration Channel; and

Control Panel Design Contest.

- Edited by Mark T. Hoske, Control Engineering, CFE Media, www.controleng.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me