Nissan, Daimler to make engines in Tennessee plant

Facility will produce 4-cylinder engines for Mercedes and Infiniti as part of collaboration agreement.

01/09/2012


Nissan and Daimler will produce Mercedes-Benz 4-cylinder gasoline engines together at Nissan's powertrain assembly plant in Decherd, Tenn. Production will begin in 2014, with installed capacity of 250,000 units per year once full ramp-up is achieved. The Decherd facility will produce engines for Mercedes-Benz and Infiniti models.

"This is the newest milestone in our pragmatic collaboration and our most significant project outside of Europe so far," said Renault-Nissan CEO Carlos Ghosn. "Localized capacity reduces exposure to foreign exchange rates while rapidly enabling a good business development in North America - a win-win for the Alliance and Daimler."

The collaboration marks the first production of Mercedes-Benz engines in the North America Free Trade region. The Tennessee plant's strategic location and logistics links ensure a direct supply of engines starting in 2014 for the Mercedes-Benz C-Class, built at Daimler's vehicle plant in Tuscaloosa, Ala.

"In the context of our Mercedes-Benz 2020 growth strategy, we have decided that we will expand the production capacities required for this close to the customers. Through the strategic extension of our cooperation with Renault-Nissan we can realize near-market engine production in the NAFTA region on attractive economic terms and make optimum use of synergies arising from the cooperation," Dr. Dieter Zetsche, Chairman of the Daimler Board of Management and Head of Mercedes-Benz Cars, said. "Thus we are systematically broadening our manufacturing footprint in this important growth market."

Nissan began powertrain assembly in Decherd in 1997. Today it manufactures 4-, 6- and 8-cylinder engines for the complete lineup of U.S.-produced Nissan and Infiniti vehicles. The plant also houses crankshaft forging and cylinder block casting operations. In 2011, Decherd produced more than 580,000 engines on a covered area of more than 1.2 million square feet (111,000 square meters).

Project portfolio expands

Daimler and the Renault-Nissan Alliance launched their strategic collaboration in April 2010, including an equity exchange that gives the Renault-Nissan Alliance a 3.1% stake in Daimler and Daimler a combined 3.1% interest in Renault and Nissan.

The collaboration began with three project pillars:

  • Joint smart/Twingo architecture: The project is on track for launch in the early first quarter of 2014. Two-seater smart vehicles will be produced at Daimler's plant in Hambach, France, and four-seater smart and Renault production are slated for Renault's plant in Novo Mesto, Slovenia.
  • All-new entry-level city van project for Mercedes-Benz: The project is on schedule with expected launch in late 2012.
  • Powertrain cross-supply: The Alliance is supplying Daimler with compact three-cylinder gasoline engines to be used in smart and Twingo vehicles and four-cylinder diesel engines to be used in the jointly developed light commercial vehicle and in Mercedes-Benz's next generation of premium compact cars. Daimler will supply Nissan and Infiniti with four- and six-cylinder gasoline and diesel engines from the current and future engine portfolio as well as with automatic transmissions.

Since its founding in April 2010, the collaboration has been gradually expanded. In addition to the announcement this week about North American engine production, the companies had also earlier decided to partner on:

  • Platform sharing: Infiniti plans to base a premium compact vehicle on the Mercedes compact-car architecture, starting in 2014.
  • Zero-emission vehicles: Daimler will provide batteries from its production facility in Kamenz, Germany, and Renault-Nissan will provide electric motors for the use in electric vehicles (smart and Twingo ZE). First releases will occur in 2014.


No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
Cannon Design’s blog is a place for the many voices of the firm to share thoughts and news related to current projects...
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.