New Products

Thermostat wire adds a ripcord with an easy-to-strip feature that helps prevent inner conductor nicks and cuts. The ripcord is available in all gauges, lengths, styles, colors, and in reels. (Baron Thermostat wire ripcord by Coleman Cable) www.colemancable.com Input #1 at www.csemag.com/QuickResponse Fiber optic connectors provide precision mechanical termination of single-mode or multi-mode...

12/01/2007


Thermostat wire adds a ripcord with an easy-to-strip feature that helps prevent inner conductor nicks and cuts. The ripcord is available in all gauges, lengths, styles, colors, and in reels. (Baron Thermostat wire ripcord by Coleman Cable) www.colemancable.com Input #1 at www.csemag.com/QuickResponse

Fiber optic connectors provide precision mechanical termination of single-mode or multi-mode fiber without the need for tools, epoxy, or hand polishing. The connectors meet TIA and EIA 568-B.3 performance requirements (FastCAM Fiber Optic Connectors by Leviton) www.leviton.com #2

Pneumatic air preparation unit meets NACE specifications and features stainless-steel construction. The devices in the series are corrosion-resistant and suitable for washdown duty in tough environments. The air preparation units feature high flow rates, standard fluorocarbon seals and are suitable for pressures up to 300 PSIG. Available in sizes of 0.25 in. and 0.5 in. and the filter particulate ratings are 5 to 40 microns. (Parker Prep-Air Stainless Steel Series by Parker Hannifin) www.parker.com/pneumatics #3

Diffusers feature a cone design for maximum airflow. The diffusers are available in 2-cone, 3-cone, and perforated models. The collar design features a 2.25 in. collar for flex duct connection. The device also features a preformed insulation shell and is made of heavy gauge steel with no sharp surface edges. The diameter of the collar comes in sizes of 6 in., 8 in., 10 in., and 12 in. (2x2 Diffusers by Metal Fab) www.metal-fabinc.com #4

Network devices provide accurate timestamping and synchronization across all power system components. The device synchronizes equipment clocks using network time protocol. The timeserver offers coordinated universal time by communicating through traditional global positioning system and code division multiple access cellular broadcast signals thus maintaining an accuracy of 100 nanoseconds. The device is capable of obtaining 100,000 data samples per cycle and coordinated throughout the power system to within one millisecond. (Power Xpert Network Time Servers by Eaton) www.eaton.com #5

Wireless networking tools resolves interference issues and features high levels of frequency resolution, amplitude resolution, and amplitude range. The technical specifications include an external antenna; a frequency range of 2,400 MHz to 2,495 MHz; a frequency resolution of 328 KHz; an amplitude range of -110 dBm to -6.5 dBm; amplitude resolution of 0.5 dBm; a sweep time of 165 ms; and is USB 1.1/2.0 compatible. (Wi-Spy 2.4x by MetaGeek) www.MetaGeek.net #6

Linear fluorescent high-bay lighting addresses elevated temperature through advanced thermal management. The lighting system provides an approach that dissipates and controls heat-producing elements. The lighting system features an aluminum ballast and heat distribution slots that remove ballast heat from the channel and reflectors. (VersaBay by Columbia Lighting) www.columbialighting.com #7

Voltage power packs supply power for as many as four sensors.The device features a manual on/off control and automatically detects input line voltage from 100 VAC to 277 VAC, which eliminates the need for voltage-specific or multi-voltage power packs. The device is capable of switching 20-amp loads and features zero arc point switching technology that minimizes relay contact wear associated with high inrush loads. (Universal Voltage Power Packs by Hubbell Building Automation Inc.) www.hubbell-automation.com #8

Commercial boiler supports dual-fuel, natural gas, and propane applications. The boiler features a 3 million Btuh condensing power, a 15:1 turndown over an operating range of 200,000 to 3 million Btuh, and matches fluctuating loads to minimize boiler cycling and eliminate temperature overshoot. The boiler also achieves 99.4% efficiency at its lowest firing rate. (BMK 3.0LN by AERCO Int. Inc.) www.aerco.com #9





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me