New Products

Simulator is designed specifically for the industrial and commercial heat control industry to simplify setting up a burner control system and verify its proper operation. The unit's UV scanner signal output interfaces to almost any UV-type control. (Quanta-Flame by GN Electronics) RS#1 Data loggers are battery-powered and high-resolution, and measure temperature, relative humidity, light inte...

09/01/2003


Simulator is designed specifically for the industrial and commercial heat control industry to simplify setting up a burner control system and verify its proper operation. The unit's UV scanner signal output interfaces to almost any UV-type control. (Quanta-Flame by GN Electronics )

Data loggers are battery-powered and high-resolution, and measure temperature, relative humidity, light intensity and other indoor environmental conditions. High-precision sensors enable long-term data accuracy, and 12-bit resolution provides high-res measurements for detecting greater variability in recorded data. (HOBO U12 by Onset Computer Corporation )

Fire controller can be configured without a display or with a 640-character multi-line LCD. It supports a full line of remote annunciators, programming tools, modular configuration options and intelligent detector technology. It also supports applications requiring multi-channel voice evacuation capabilities. (IFC-3030 by Johnson Controls )

Liquid-to-steam humidifier has been redesigned to include the following new capabilities: a temperature sensor that enables the controller to hold water at a preset temperature, allowing a rapid response to a call for humidity; data reports to monitor humidifier performance; and a real-time clock that allows time-stamped alarm tracking. (LTS by Dri-Steem )

Fluorescent luminaires are suited for high-mount applications where high lumen output is required. The fixtures offer uniform brightness control, high system efficacy, 95% lumen maintenance and instant-on/instant-restrike. (Metalux F-Bay by Cooper Lighting )

AC power switch combines redundant power switching, undervoltage sensing and "out of phase" source switching, allowing AC power sources that are not phase-synchronized to be switched. The unit accepts two AC power inputs. Its intelligent circuitry monitors both inputs and can transfer power to the secondary power source if primary power is lost. (T2235 Series by Pulizzi Engineering )

Humidity control unit is designed to treat 100% makeup air and works in conjunction with existing air conditioning or energy recovery ventilator units. It controls humidity on an as-needed basis, when humidity levels exceed setpoint. (HCU by Munters Corporation )





Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me