New Products for Power Quality and Reliability


Power-quality analyzer features 0.1% voltage accuracy and GPS time-synch option, making unit fully compliant with the IEC 61000-4-30 Class A standard. Memory allows up to 400 parameters at user-defined intervals, and power-log software enables users to view logged data and generate reports. Main signaling capability allows interference measurement from ripple control signals at specific frequencies. Current probes are 600-volt CAT IV-rated and do not require batteries. For more about Model 1760 by Fluke, click here .

DC/DC brick converters can deliver up to 600 watts of output power from an input range of 250 volts DC to 420 volts DC. The series includes six models with single-output DC voltages of 1.8, 3.3, 5, 12, 15, 24 and 48 volts. In addition, the product family offers a host of embedded functions that include monitoring, protection and adjustment capabilities as well as a communication bus that can store valuable end-user information. For more about AIF-300Vin from Astec, click here .

Mobile generator expands the manufacturer's existing line. At 400 kVA, units produce 320 kW of standby power. In prime-power settings, generators are designed to give 365 kVA, providing 292 kW of power. Units can deliver multiple voltages using a voltage changeover board for either single- or 3-phase configurations. Electronic engines provide accurate frequency regulation, and auto-start feature allows for remote starting when installed in tandem with a transfer switch. Models also include a 100% containment basin under the engine, which is certified to EPA Tier Three emissions levels. For more about the TS400 by Baldor, click here .

Genset controller is expandable to address single and multiple gensets operating in standby or parallel modes. Display and graphing enables intuitive user operation, and built-in PLC enables custom programmability and protection. A variety of analog and binary input/output expansion modules are available, along with remote display, annunciation panels, modem/Internet connections and electronic engine-specific communication modules. For more about genset controllers from MCE, click here .

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Economics of HVAC systems; NFPA 110-2016; Designing and choosing modular data centers
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me