New Products for Power Monitoring

04/24/2006


Current/voltage data logger, PQ data center, power monitoring instrument, and insulation testers

Current/voltage data logger has eight channels. Four channels are available for use with external clamp-on current probes to measure and record alternating current; three channels are for voltage input; and one is dedicated to a built-in thermistor for temperature measurement. For more about the Model DL-AC logger from Dwyer, click here .



Power quality data center allows users ot identify all site trends and power events for an all-inclusive view of network functionality. The system takes advantage of infinite continuous data logging and storage. The platform interconnects transparently through Ethernet and TCP/IP. The embedded web server provides easy access using standard Internet software. For more about G4400 from Elspec, click here .


Power monitoring instrument incorporates a color touch screen into a lightweight design. Users can select the length and mode of data collection, including troubleshooting, data logging, fault recording, inrush, power quality surveys, equipment performance testing, energy studies and loading balance.Automated setups provide instant detection of circuit types and configurations, ensuring that the instrument is ready to successfully collect data. The unitcollects data at 256 samples/cycle/channel for both voltage and current and offers remote communications using the RS-232, Ethernet or USB options. For more about PowerGuide 4400 from Dranetz-BMI, click here .


Insulation testers comprised of three analog/digital models are available for 5-kV and 10-kV applications. Base model has five pre-programmed test voltages—250, 500, 1,000, 2,500 and 5,000—and measures to 15 TW on the digital scale.

Second model includes all the above, plus the ability to step up the voltage in 10-volt increments from 50 to 1,000, and in 25-volt increments beyond 1,000. Third model includes pass/fail alarm.For more about MIT models from Megger, click here .





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me