New Products for Lighting


Fluorescent fixture is UL-listed for marine use in indoor marine environments, engine rooms, cargo hold areas, offshore oil rigs, wastewater treatment areas, and other extreme environments. Built with a corrosion-free, high-impact fiberglass-reinforced, it features UV-stabilized nylon housing and a high-impact polycarbonate diffuser. For more about LFSB Snaplight from Phoenix, click here .

High-pressure sodium, non-cycling lamp is the newest addition to the company’s Ceramalux line. The lamps are said to eliminate the unwanted cycling that often causes outdoor lamps to consistently turn off and on at the end of life, now making it easier to determine which lamps should be replaced. The lamp passes U.S. EPA's TCLP test for non-hazardous waste, and contains up to 90% less mercury than a standard high-pressure sodium lamp. For more about Ceramalux from Philips, click here .

Emergency lighting relay control device works in conjunction with an auxiliary generator or central inverter system to power designated emergency lighting loads up to 20 amps regardless of local switch position. The GTD20A acts as either a switch bypass or transfer device and is not limited to emergency lighting applications. For more about GTD20A from Bodine, click here .

Pulse-start lamp is said to be the first compact ANSI Type-O, high-wattage metal-halide lamp in the industry. The 875-watt lamp provides energy savings, longer life and significantly more light over time than today’s standard 1,000-watt metal-halide system.It is suited to applications where energy savings and superior performance are key concerns, including parking lot, outdoor, high bay and site lighting. For more about MP875 from Venture, click here .

Five-tap lighting ballasts are now an optional feature on many of the manufacturer’s fixtures. Five-tap ballasts are said to give customers a versatile lighting solution for use on each of the five U.S. voltage systems: 120-, 208-, 240-, 277- and 480-volt. This should translate into reduced stocking requirements for the end user, distributor and contractors involved in fixture installation and maintenance. For more information about five-tap ballasts from Appleton, click here .

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me