New Products for HVAC and Building Controls

04/02/2007


Heavy-duty industrial in-line valve series is specifically designed for use in extreme operating conditions. The new product incorporates spool technology for effective use in applications where pneumatic systems have to operate at extreme temperatures in the range of -40 here .

Water heater and boiler product lines now offer greater venting flexibility with new vent reducer kits. Available for installation with Category IV vent systems, the vent reducer kits allow the vent diameter of each model to be reduced by as much as 45%, thus reducing the installed cost. All water heaters and boilers offer the flexibility of six different venting options with up to 50 equivalent feet of air intake and 50 equivalent feet of venting. For more about Power-Fin from Lochinvar, click here .

Conduit connectors meet the demand for conduit fittings that function well in heavily corrosive environments.conduit connectors from Thomas & Betts, click here .

Drive-bypass system is designed specifically for commercial HVAC applications. The "I-Beam" design enclosure allows for ease of mounting in very narrow locations. According to the company, the new packaged drive-bypass is competitively priced and will be widely available directly from the manufacturer, as well as through the company's distribution channels. For more about the E7L Drive Bypass System from Yaskawa, click here .





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me