New Products for Electrical Systems

02/21/2006



Stainless motors are available inizing. For more about SSE from Baldor, click here .


Input/output system offers solution for IP20 optimized-type distributed I/O requirements. Designed for simple and compact machines, it provides the right technical and economical balance among size, cost and ease of installation.

Users can create I/O islands managed by a master controller, via a fieldbus or communication network. For more about Advantys from Schneider, click here .


Recessed downlight has been engineered to solve problems with fire-rated ceiling issues. UL listed electrically, and UL classified for fire resistance, the units meets the stringent electrical installation requirements for a fire-rated ceiling. The product is comprised of seven pieces of fire-rated sheetrock as well as a fire-retardant blanket gasket. For more about FireTight from Prescolite, click here .

Automatic circuit restoration system incorporates an algorithm that develops a protection curve that coordinates very closely with the minimum response curve of an upstream device and the maximum clearing curve of a downstream device. The process continues for all devices on the circuit, until a mis-coordination with lateral protective devices is detected. For more about IntelliTEAM III from S&C, click here .





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me