New Products for Electrical and Lighting

Digital addressable dimming ballasts, in-line cords and cable tray.

07/17/2007



Digital addressable dimming ballast can dim lights to less than 1% and more than 100% illumination while upholding the efficiency of a non-dim ballast. The new line is said to provide the same architectural fluorescent dimming performance as earlier models but with additional key features. With a dimming range of here .

In-line cord sets are rated for 15 amps, in both single and triple-tap configurations. The portable ground fault product is said to be of heavy-duty construction and NEMA-3R rated. The new cord sets are suitable for industrial, commercial and construction environments, and units can be used indoors or outdoors in a variety of applications including construction sites, machine shops, manufacturing and MRO activities. A bright LED indicator on the sets provides at-a-glance power and fault status, and recessed‘test and reset’ buttons help the user avoid accidental actuation during handling and use. The new offering comes with either automatic reset or manual (safe-start) reset, both of which meet OSHA requirements for open neutral protection. For more information about in-line ground fault portables from Bryant, click here .

Cable tray system is paint-ready and suited to any application that requires a solid bottom tray that needs to be painted. The single piece design of the straight sections provides maximum cable protection while hiding the cables from view when aesthetics are important. Galvanneal steel ASTM A653SS A60 construction offers smooth surfaces and radius fittings for easy, snag-free wire pull. For more about cable tray from Cooper B-Line, click here .





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me