New Products: Chilling News


Centrifugal chiller
capacity has been extended to provide the industry with what is claimed to be the largest-capacity, single-package chiller using HFC-134a. This increases the chiller’s previous capacity by 75%, while its compact footprint is said to be as much as 50% smaller than chillers of comparable capacity. For more information about MaxE YD from York, click here .

Large capacity industrial water chiller has been reintroduced to the market after a six-year absence. With a capacity performance in the nominal 3,000-, 4,000- and 5,000-ton range, the unit uses environmentally sound HFC 134a refrigerant. A steam turbine, electric motor or gas engine drive can be selected to match the most economical fuel available. Dual-drive steam turbine and electric motors have been applied, giving the owner-operator maximum flexibility. For more information about Model 17DA from Carrier, click here .

Recirculating chiller selector tool selects up to five recirculating chillers, based on user input that will work for a particular application. The selection process can be further refined by inputting the set point temperature, ambient temperature, desired flow rate, or power configuration.The user then configures the chiller by selecting a pump, controller package, and options. The tool provides pump curves and complete descriptions of the controller packages and upgrade options. For more information on selector tool from Lytron, click here .

Centrifugal chiller has magnetic bearings that offer oil-free, frictionless operation as low as 0.375 kW per ton IPLV. Full-load performance is as low as 0.62 kW per ton, which the vendor claims is about 32% more efficient that screw compressor chillers. The magnetic bearing technology is also said to reduce sound levels. For moreinformation about chillers from McQuay, click here .

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me