NERC Projects Reliable Electricity This Summer

Electricity capacity margins are expected to be adequate to ensure reliable electric service throughout North America this summer, assuming normal summer weather conditions, according to the North American Electric Reliability Corporation's 2007 Summer Assessment.

06/25/2007


Electricity capacity margins are expected to be adequate to ensure reliable electric service throughout North America this summer, North American Electric Reliability Corporation (NERC). However, widespread and sustained hot and humid weather could threaten that reliability.

The 2007 Summer Assessment represents NERC’s independent judgment of the reliability and adequacy of the

“The numbers tell us we will be OK, but the weather has been challenging in recent years. If areas of North America experience extended periods of extreme weather this summer, utilities may need to implement emergency procedures to reduce customer demand,” Sergel said.

In summer 2006, when extreme weather was experienced across much of North America, some utilities issued emergency alerts and public appeals, implemented voltage reductions and exercised contracts with customers that allowed them to interrupt electricity supply in return for lower rates. All these actions helped keep supply and demand in balance and maintained the reliability of the bulk power system.

Extreme weather can impact the electricity grid in numerous ways. Higher demand for electricity, mainly from air conditioning, stresses the electricity supply and delivery system. Butand damage. Finally, levels in U.S. hydro reservoirs, already lower than normal, could drop even more.

Areas of the greatest concern, which NERC has put on its Summer Watch List, are:

• Southern California, which relies on significant amounts of imported power, transported across transmission lines that are heavily loaded during normal operation;

• The Greater Connecticut region, which relies heavily on imported power, although the addition of 200 megawatts of demand-reduction measures since last summer will help the situation;

• British Columbia, which faces the risk of severe flooding that could damage transmission equipment or require taking equipment out of service.

Areas with improved conditions since last summer include:

• The Southeast, where utilities invested more than $1.21 billion in transmission in 2006;

• Boston, where the ability to import electricity has been boosted by 1,000 megawatts due to two new 345 kV transmission lines running from Stoughton, Mass., into Boston, which became operational in October 2006 and May 2007 respectively;

• Southwestern Connecticut, which can import 230 more megawatts of electricity since a 345 kV transmission line from Bethel to Norwalk was put into service in October 2006;

• Texas, which has reduced its transmission congestion, allowing it to reduce the number of less-efficient generating units that must run in tight reliability situations from seven to one.

Several issues highlighted in NERC’s Long-term Reliability Assessment issued in October 2006 are being addressed. The amount of demand represented by customer Interruptible Demand and Direct Control Load Management programs increased since last year by more than 10% in Florida, 13% in other parts of the southeastern United States and almost 20% in the western United States and Canada. Many regions are studying the interdependence of fuel delivery and reliability, and improving coordination between fuel suppliers and generators.

Also, in Nebraska, all 37 transmission lines damaged in December 2006 ice storms are back in service, six weeks ahead of schedule.





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me