NEMA publishes revisions to motors and generators standard

The National Electrical Manufacturers Assn. has published "MG 2-2001 Revision 1, 2007 Safety Standard and Guide for Selection, Installation, and Use of Electric Motors and Generators."

08/14/2007


The National Electrical Manufacturers Assn. has published "MG 2-2001 Revision 1, 2007 Safety Standard and Guide for Selection, Installation, and Use of Electric Motors and Generators."

This publication is a guide to assist both users and manufacturers of driven or driving equipment in the proper selection, installation and use of machines. It identifies potential hazards and suggests ways to reduce the risks.

MG 2-2001, Revision 1-2007 revises and supersedes MG 2-2001. It may be downloaded at no charge, or purchased in hardcopy at the NEMA website.

Also available from NEMA are reaffirmations of " MG 10-2001 (R2007) Energy Management Guide For Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors" and " MG 11-1977 (R1997, R2001, R2007) Energy Management Guide for Selection and Use of Single-Phase Motors."

MG 10-2001 (R2007) includes typical characteristics of IEC Design H and N induction motors and information about the NEMA energy-efficient and NEMA premium efficiency motor standards.





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me