NEMA publishes MG 1-2006 revision 1 2007 on motors and generators

The National Electrical Manufacturers Assn. (NEMA), Rosslyn, Va., has published MG 1-2006 Revision 1 2007, “Motors and Generators.”

11/27/2007


The National Electrical Manufacturers Assn. (NEMA), Rosslyn, Va., has published MG 1-2006 Revision 1 2007, “Motors and Generators.”
This edition incorporates previously published information about 50- and 60-Hz NEMA Premium electric motors. It features an entirely revised table of contents; updated referenced standards; full-load efficiencies of 50- and 60-Hz NEMA Premium electric motors; clarifications of terminal markings of polyphase-induction machines; revised illustrations; and equations for temperature rises for air-cooled machines for ambients lower than 40 C, but not below 0 C.
The contents and scope of MG 1 may be viewed or the entire MG1-2006, Revision 1 2007 may purchased for $245 by visiting NEMA’s website at www.nema.org/stds/mg1.cfm . Revised pages only may be purchased for $177 at www.nema.org/stds/MG1-2006Rev1-2007-revisedpages.cfm .





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Economics of HVAC systems; NFPA 110-2016; Designing and choosing modular data centers
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me