NEMA Publishes ANSI/NEMA GR 1-2007 Grounding Rod Electrodes and Grounding Rod Electrode Couplings

The National Electrical Manufacturers Assn.'s ANSI/NEMA GR 1-2007 provides practical information concerning materials, construction, testing, performance and manufacture of copper-bonded ground rod electrodes, zinc-coated ground rod electrodes, and stainless steel-clad ground rod electrodes.

09/18/2007


The National Electrical Manufacturers Assn. (NEMA), Rosslyn, Va.,stainless steel-clad ground rod electrodes.

This ANSI-approved standard applies to electrodes and electrode couplings that function according to the National Electrical Code (NEC) and the National Electrical Safety Code (NESC). It covers design and performance requirements and provides recommendations for selections and use. It also includes information for electrode products that have been successfully used for many years but are not defined within NEC or NESC.

The contents and scope of GR 1-2007 may be viewed, and a hard copy or electronic copy purchased for $58, by visiting NEMA’s website at www.nema.org/stds/gr1.cfm , or by contacting IHS at 800-854-7179 (within the U.S.), 303-397-7956 (international), or 303-397-2740 (fax).





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Economics of HVAC systems; NFPA 110-2016; Designing and choosing modular data centers
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me