NEMA Guidelines for Fittings Used with Non-Flexible Metallic Conduits or Tubing

The National Electrical Manufacturers Assn. (NEMA) has published FB 2.10-2007 Selection and Installation Guidelines for Fittings for Use With Non-Flexible Metallic Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing).

05/15/2007


The National Electrical Manufacturers Assn. (NEMA) has published FB 2.10-2007 Selection and Installation Guidelines for Fittings for Use With Non-Flexible Metallic Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing).

These selection and installation guidelines offer practical information on correct product selection and industry-recommended practices. The FB 2 series of publications was developed by NEMA’s Conduit Fittings Section and represents NEMA’s commitment by to quality raceway installations made in accordance with the National Electrical Code .

FB 2.10-2007 may be downloaded free, or a hardcopy purchased for $54.00 by visiting NEMA’s website at www.nema.org/stds/fb2-10.cfm , or by contacting IHS at (800) 854-7179 (within the U.S.), (303) 397-7956 (international), (303) 397-2740 (fax).





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me