Multiple bus load and generator control software

Emerson Network Power's ASCO Multiple Bus Load and Generator Control can operate up to eight independent multiple buses simultaneously as well as 16 gensets and 128 loads.

11/08/2013


Emerson Network Power's ASCO Multiple Bus Load and Generator Control can operate up to eight independent multiple buses simultaneously as well as 16 gensets and 128 loads. Courtesy: Emerson Network PowerThe ASCO Multiple Bus Load and Generator Control software by Emerson Network Power makes it possible for a single programmable logic controller (PLC) in ASCO generator paralleling switchgear to reliably operate up to eight independent multiple buses simultaneously with full, feature-rich functionality. In addition, when multiple buses are part of a 3-phase, complex tie breaker connected ring, the ASCO Multiple Bus Load and Generator Control software offers the flexibility to operate any combination of the buses as a single system, or separately when they're disconnected, again with full functionality. ASCO Multiple Bus Load and Generator Control software drives a PLC in the master section of the lineup. It controls up to 16 gensets and 128 loads spread across up to eight buses. It is suitable for both standard and mission critical applications, and low- and medium-voltage systems.

Emerson Network Power

www.emersonnetworkpower.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me