Motor controllers for commercial, industrial applications

Schneider Electric's TeSys U Self-Protected Combination Motor Controllers and Square D TeSys N Self-Protected Combination Motor Controllers are designed for industrial and commercial buildings as well as OEMs.

03/10/2014


Schneider Electric's TeSys U Self-Protected Combination Motor Controllers and Square D TeSys N Self-Protected Combination Motor Controllers are designed for industrial and commercial buildings as well as OEMs. Courtesy: Schneider ElectricSchneider Electric's TeSys U Self-Protected Combination Motor Controllers and Square D TeSys N Self-Protected Combination Motor Controllers offer National Electrical Manufacturers Association (NEMA) and International Electrotechnical Commission (IEC) ratings and designs, combining the latest compact IEC motor control technologies with the robustness and familiar application sizing of NEMA products. The TeSys N Self-Protected Combination Motor Controller is a NEMA combination starter solution designed for full voltage non-reversing and full voltage reversing motor control applications in commercial and industrial buildings. The TeSys N motor controllers are available in a variety of enclosures in NEMA 1, 12/3R and 4/4X environmental ratings. The TeSys N controller also features a large side-mounted safety switch style disconnect handle and a patent-pending hinge assembly that swings the starter out for easy accessibility for labor-saving installation, wiring and maintenance. The UL self-protected designation means performance under short-circuit conditions is outstanding and the current-limiting motor starter is ready to restart immediately after a fault is cleared. TeSys N Combination Motor Controllers can include optional communication modules that connect to a wide variety of networks. 

The TeSys U Self-Protected Combination Motor Controller is designed for full voltage non-reversing and full voltage reversing motor control applications installed in industrial facilities and for original equipment manufacturers (OEM). The units are rated per IEC Standards up through 32 amps or 20 horsepower. The controllers are available with space-saving enclosures rated for NEMA 1/12/3R and 4/4X environmental ratings and a rotary disconnect for manually switching and resetting the controller. The TeSys U Combination Motor Controller has the ability to communicate over a wide variety of networks including predictive maintenance alerts collected from multi-function control units. 

Schneider Electric

www.schneider-electric.com 

- Edited by CFE Media. See more Control Engineering motor and drive products.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me