More than 100 million smart meters with integrated HAN gateways to be deployed in the next five years

More than 100 million smart meters will be deployed with integrated home area network (HAN) gateways in the next five years, according to IMS Research.

06/07/2012


IMS Research, recently acquired by IHS Inc., forecasts that more than 100 million smart meters will be deployed with integrated home area network (HAN) gateways in the next five years.

An integrated HAN gateway enables communication between the smart meter and devices within a home energy management system (HEMS), such as an in-home display or smart appliance (once these are more widely available), generally using a communications solution which is discrete to the WAN/NAN solution. For example, in the U.S., where integrated HAN gateways have become commonplace (despite many not being activated/enabled by the utility company), most smart meters are deployed with a fixed RF mesh solution for the backhaul network (e.g. smart meter to concentrator) and often ZigBee (a standardized RF mesh technology based on IEEE 802.15.4) for the HAN solution.

Like the approach to the deployments of smart meters themselves, the inclusion of a HAN gateway is typically very country-specific and legislation-driven. Even where there is a common framework, actual deployment strategies vary. For example, EU regulations require the deployment of smart meters to most consumers within the next eight years (EU regulation 2007/72/EC). However, it is up to EU Member States to determine their own implementation strategies. As a result, approaches vary widely.

Lisa Arrowsmith, senior analyst with IMS Research, explains, “At one extreme, there are countries such as Italy, the first in Europe to start to deploy smart meters full-scale. Here, there’s been a penetration rate of more than 90 percent of households for a number of years. However, the main focus at this stage was not on developing HAN solutions, and the smart meters were deployed without integrated HAN gateways. As a result, the Energy@Home Initiative (formed by Electrolux, Enel, Indesit and Telecom Italia) is working to develop a common system which can ‘retrofit’ these smart meters with HAN gateways, most likely via a powerline-ZigBee gateway, to give home energy management systems access to consumption data and other information available via the AMI network. This is an example of a very commercially-driven approach to deploying HAN solutions and home energy devices.”

Conversely, in countries such as the United Kingdom, the Government has not only required that smart meters be deployed with integrated HAN gateways, but also compatible in-home displays (IHDs) are set to be deployed concurrently. Similarly, the other side of the world, the Victorian Government in Australia has mandated the inclusion of integrated HAN gateways, and is set to offer subsidized IHDs to smart meter customers. Arrowsmith continues, “As a result of legislation such as this, a recent study from IMS Research (The World Market for Smart Home Energy Management Systems – 2012 Edition) projects that annual global shipments of IHDs will grow from around two million units last year, to more than 13.5 million units in 2015. However, where there isn’t legislation, IHDs are set to face competition from ‘soft’ displays, where electricity consumption information is instead displayed on existing screens, such as tablet PCs, cellular handsets, and even TVs.”

Elsewhere in Europe are difference approaches to integrated HAN gateways. France is an interesting example, where the smart meters (or ‘Linky’ meters, as they are termed in France) are deployed without an integrated HAN gateway, but with a common port to enable the retrofit of a communications module. 

Arrowsmith concludes, “There is growing momentum behind not only deploying smart meters with integrated HAN gateways, but also towards retrofitting existing smart meter installed bases with the functionality to participate in energy management systems. Yet there are still a number of barriers stopping the widespread uptake of home energy management systems to communicate with these HAN gateways. These include the lack of widespread incentives, such as dynamic pricing tariffs, the immaturity of utility plans for demand-response programs, and the fact that many utility companies – particularly in the U.S. – have not enabled HAN gateways, even where they are installed in the field. Despite this, a range of factors, including the growing availability of dynamic pricing, as well as the involvement of a range of commercial organisations, such as telecommunications companies, consumer goods providers and even security providers, are set to drive the market for home energy management systems to over $9 billion over the next five years.”



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
Cannon Design’s blog is a place for the many voices of the firm to share thoughts and news related to current projects...
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.