Modular cooling system

The HP Modular Cooling System (HP MCS) 100 and 200 are close-coupled cooling systems that can effectively cool fully populated high-density racks, which save floor space and cooling resources.

05/06/2014


The HP Modular Cooling System (HP MCS) 100 and 200 are close-coupled cooling systems that can effectively cool fully populated high-density racks, which save floor space and cooling resources. Courtesy: Hewlett-PackardThe HP Modular Cooling System (HP MCS) 100 and 200 are close-coupled cooling systems that can handle rack power and cooling requirements from 5,000 to 50,000 W without adding to the current heat load on the existing conventional data center cooling system. The HP MCS 100 and 200 can effectively cool fully populated high-density racks, which save floor space and cooling resources. Each server receives an adequate air supply, regardless of its position within the rack or the rack's density. As the servers expel warm exhaust air out the rear of the rack, the fan modules redirect the warm air into the heat exchanger module. The air is recooled and then recirculated to the front of the rack. The HP MCS 100 offers 5,000 to 35,000 W capacity, and the HP MCS 200 offers 10,000 to 50,000 W. Each model is capable of cooling one or two racks.

Hewlett-Packard (HP)

www.hp.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Pump technology design: Selecting pumps and pipes; Class A office buildings; NFPA 101-2015; ASHRAE 90.1 updates; Motors, drives, and HVAC efficiency
Renewable power systems: Designing a net zero energy building; NFPA 37; Data center design; Lighting systems
Salary survey: How much are you worth?; Dedicated outdoor air systems; Energy models and lighting
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Implementing microgrids: Controlling campus power generation; Understanding cogeneration systems; Evaluating UPS system efficiency; Driving data center PUE, efficiency
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.