Miniature contactor series to switch, control motors

AutomationDirect’s WEG CWC series miniature contactors are designed to switch and control motors and are 35 mm DIN-rail mountable and have IP20-rated housings.

03/26/2014


AutomationDirect’s WEG CWC series miniature contactors are designed to switch and control motors and are 35mm DIN-rail mountable and have IP20-rated housings. Courtesy: AutomationDirectAutomationDirect’s WEG CWC series miniature contactors are designed for switching and controlling motors. The compact dimensions for its IEC current rating, up to 22 A, AC-3 utilization category, allows it to take up less space inside electrical enclosures while still offering up to a powerful 15 hp at 460 V.

Dimensions of the 7 A to 16 A contactors are the same for ac or dc coil voltages. The dc models feature low consumption coils allowing operation directly from a PLC without interface relays. Available in three-pole and four-pole models, contactors are 35 mm DIN-rail mountable and feature IP20-rated housings, self-lifting pressure plates and coil voltage indication.

AutomationDirect

www.automationdirect.com 

- Edited by CFE Media. See more Control Engineering sensor and actuator products.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me