Millions for clean energy projects, advanced building codes

The Dept. of Energy will award $6.6 million in competitive grants for clean energy projects and advanced building codes.

09/10/2008


The Dept. of Energy (DOE) recently announced that it will award $6.6 million in competitive grants for 15 state-level projects, nine of which focus on developing policy and regulations to support gigawatt-scale clean energy capacity, and six of which focus on developing advanced building codes.

Of these awards, $4 million will go to the gigawatt-scale clean energy capacity projects, which will develop policy and regulatory frameworks that will enable gigawatt-scale clean energy, either through renewable energy or demand-side reductions.

Although no cost share was mandated, state partners will contribute up to $1.8 million for these projects. The six advanced building codes projects will receive $2.6 million, which will assist states in developing and implementing residential, commercial, or overarching building codes. Along with its financial assistance, DOE will support these projects with ongoing technical assistance.

Of the nine clean energy capacity projects, three will go to states that are focusing on electrical grid infrastructure: Colorado will examine barriers and incentives to expand its transmission grid for renewable energy projects, while Hawaii and Maryland will examine policies for smart grid technologies that could encourage the use of renewable energy, demand-side management, and energy storage.

Two states will focus on financing: Michigan will develop four pilot projects for utility financing of customers' cost-effective clean energy projects, with each loan repaid using a portion of the consumer's energy cost savings, while Wisconsin will draft regulations for low-interest loans for renewable energy projects. Wisconsin will also aim to convert up to 25 old, small coal-fired power plants to burn wood instead.

In the Southeast, Georgia will develop a framework for integrating clean energy supplies into the energy infrastructure of Georgia, North Carolina, and South Carolina, while South Carolina will seek to overcome barriers for coastal wind, wave, and tidal energy projects. And in terms of energy efficiency, Arizona will create a streamlined and cost-effective home weatherization program, while Maine will partner with the Northeast Energy Efficiency Partnership to develop regional protocols for evaluating, measuring, verifying, and reporting demand-side resource impacts.

For the advanced building code projects, Florida, Massachusetts, Nebraska, and Washington are improving their existing residential or commercial energy codes in order to produce a 30% energy usage reduction over the existing codes. In addition, North Carolina will update its state energy code by 2010, while California plans to build the California Building Energy Efficiency Standards Learning Management System, an online system that will educate building department processionals about enforcing its current building energy efficiency standards and the next standards update.





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me