Micro plate heat exchangers

Danfoss’ Micro Plate Heat Exchangersvcontribute to increased energy efficiency and improved environmental performance in chillers, heat pumps.

07/11/2011


Danfoss’ Micro Plate Heat Exchangers (MPHEs) contribute to increased energy efficiency and improved environmental performance in chillers, heat pumps, and a variety of industrial applications. MPHEs feature a unique channel plate pattern, including a dimpled surface that improves flow across the plate and use of the surface area for better heat transfer. When compared with traditional brazed plate heat exchangers, MPHEs have an exchanger index value up to 56 higher under the same working conditions. Danfoss offers three ranges of MPHEs: C-range optimized for chillers, to work as condensers or evaporators in air- or water-cooled systems; H-range MPHEs for use in ground- and air-source heat pump systems; and D-range for generic range. All three MPHE ranges come with a complete program of optimized evaporator, condenser, and single-phase products along with dual circuit solutions. They are fully compliant with regulations such as PED and UL.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me